Select Page

Hydraulic Pump Repair

Most dynamic machines are powered by hydraulic pumps. Found in hydraulic systems, hydraulic pumps are responsible for pushing fluids of varying quantities through hydraulic motors, also known as cylinders. The pump is responsible for converting the speed or torque drive’s mechanical energy or force into hydrostatic energy in the form of pressure or fluid flow. Hydraulic pumps enable machines with hydraulic systems to perform various tasks such as opening, lifting, lowering, rotating or even closing components.

CONTACT US

The operation of hydraulic pumps is based on the principle of displacement. As such, hydraulic pumps feature chambers sealed through mechanical processes. These chambers facilitate fluid flow from the suction port inlet to the pressure port outlet. The chambers ensure that the two pump ports have no direct links. Therefore, hydraulic pumps are used in high pressure environments such as hydraulics.

Hydraulic pumps are manufactured for varying uses in hydraulic systems with different requirements such as allowed pressure range, medium of operation, drive type, etc. This means that there’s no single pump that can meet all hydraulic requirements in entirety.

Types of Hydraulic Pumps

There are different types of hydraulic pumps as described below:

  • Gear Pumps

Designed to feature few movable parts, gear pumps are smooth operators at high pressures of up to 210 bar.  These pumps have high speeds of up to 3000 to 6000 rpm. Gear ring, external gear, screw spindle and internal gear are typical examples of gear pumps.

  • Piston Pumps

Piston pumps are designed to support large fluid flows at high pressures within hydraulic systems. These pumps find use in the marine, industrial, offshore, and mobile and construction equipment. Radial fixed, radial variable, axial fixed and axial variable displacement pumps are examples of piston pumps.

  • Vane Pumps

Vane pumps are designed for lower fluid flow pulsations (consistent flows). This means vane pumps operate at high speeds yet produce low noise levels. Denison single, Denison double, variable displacement, fixed displacement and Denison triple are examples of vane pumps.

  • Screw Pumps

Screw pumps are designed to support high fluid flow in low pressure environments. They include double end, single end, multi-rotor timed, single rotor and multi-rotor untimed.

The essence of hydraulic pumps in hydraulic systems is clear at this point. This means if they fail, your hydraulic system’s proper functioning is impaired. As a result, your system can realize reduced performance and thus production. Your company can also suffer serious losses in terms of customers and finances.

Are you asking yourself, “Where can I find a hydraulic pump repair near me?”

Don’t worry because this is where IMS comes in to offer you hydraulic repair services. We offer hydraulic pump repair services to ensure your systems are back up and running, working as expected. As a result, the performance of your mobile or industrial machinery improves, leading to increased productivity and ROI. What’s more, we stock various hydraulic pumps to ensure that in case there’s need for replacement, we get the job done very fast.

Hydraulic Pump Repair Process

Since hydraulic pumps are critical parts of a hydraulic systems, their failure can impair the functioning of your systems and machinery. They can be disassembled and rebuilt during repair. First, the pumps are scrutinized part by part during inspection to find the exact problem. Option for repair is then chosen accordingly. Our hydraulic repair procedures typically involve disassembly, problem diagnosis, repair or replacement of failed components and rebuilding.

Our Customers

We have a large base of customers that access our industrial hydraulic pump repair services. Maintenance managers, plant managers, industrial plant managers, maintenance planners, maintenance supervisors, maintenance technicians and purchasing agents make up the majority of our audience.

National equipment service companies that maintain balers and compacters for commercial businesses also make up our hydraulic repair service customers.

Why the Need for Hydraulic Pump Repair Services

Our hydraulic pump repair services come in handy in the following areas:

  • Production Lines
  • Industrial Balers
  • Industrial Compactors
  • Garbage Trucks
  • Hydraulic Leaks
  • Commercial Trash Compactors
  • Car Shredders
  • Hydraulic Failure
  • Commercial Cardboard Balers

We offer a range of hydraulic pump repair services including pump testing, hydraulic pump seal replacement, operation testing, flow testing and leak testing. Sometimes, pumps can be fully rebuilt for less expense than purchasing new replacement units.

Branding

Our major hydraulic pump repair brands include:

  • Rexroth
  • Parker
  • Bosch
  • Racine
  • Vickers
  • Oil Gear
  • Continental

Why Our Hydraulic Pump Repair Services are Trusted

All our repairs are tested to ensure they meet factory specifications and industry standards before we leave a job. We have more than 60 years of combined experience working on production line machinery and hydraulic systems. This has earned us a good reputation as a trustworthy company.

Moreover, many of our customers have been working with us since IMS was originally started in 1994. We believe this is a testament to the quality and dependability of the service that we provide. This has seen our customers return for the same services, giving us repeat business.

What Makes Our Hydraulic Pump Repair Services Unique

Our repair service for hydraulics is unique from the competition because we offer full service, including troubleshooting, repair installation and testing. We also sell parts in-houses, so we’re truly a one-stop-shop for all your hydraulic and general industry machine needs.

See also:
Hydraulic Pump Seal Replacement

Why Choose Us

This service is unique from the competition because we offer unmatched timely hydraulic pump repair services accompanied with exceptional customer service and after-repair-services.  It’s our quality services, industry experience worth decades, an experienced team of hydraulic experts and a pool of state-of-the-art modern equipment, machinery and parts that differentiates us from the competition.

We can partner and work together long-term to ensure that your hydraulic systems run smoothly and in case of failure, get the broken components replaced as soon as possible, or get your new plant’s hydraulic system up and running. We assure you of quality services to meet your needs and great outcomes to keep you happy. After all, your happiness is our happiness and so is your success.

As such, your needs and happiness comes first. Therefore, we do what’s within our powers to provide hydraulic pump repair solutions tailored to meet your unique needs. We are here for you.

We offer full service, including troubleshooting, repair, installation, and testing. We also sell hydraulic pump repair parts and hoses in-house, so we we’re truly a one-stop-shop for all your hydraulic pump needs.

We are your local hydraulic pump repair shop if you’ve been searching for hydraulic pump seals suppliers or ‘hydraulic pump repair shop near me’.

Call IMS today to discuss your hydraulic pump repair cost.

Get in Touch with Us

So what are you waiting for? Call us!

CALL NOW